Universal Risers, 7/8" tube type handlebars

Part# X102 (aluminum finish) = $109.95 + shipping

BMW, R1150R
Honda
Kawasaki, ZR-7 (will require a longer brake hose, not included)
Moto Guzzi, Breva, 2005 and earlier
Suzuki, Burgman, GS500, SV650-2003, SV1000, V-Strom (all)
Triumph, Speed Triple, Thunderbird
Yamaha Virago, etc.

Part# X102B (anodized black finish) = $109.95 + shipping

Kawasaki, (ZRX1100)

The risers replace the stock 7/8" tube type handlebar clamp-cap to raise the bars up 1" (25mm) and back 1 3/8" (35mm). This will help to relieve wrist and neck pain on long rides. May require some re-routing of control cables, wiring, or hoses. Both universal riser part numbers are the same in appearance. X101 fits the Suzuki Bandit bolt pattern, X102 fits the smaller Yamaha Seca II bolt pattern. X101 and X102 are physically the same as S121 and Y121, respectively. X102B is the black anodized version of X102. Does not fit 1" tube handlebars.
Instructions for installing handlebar risers for tube handlebars.

X102 installed on a 2002 Suzuki GS500.


X-102 riser installed on a Suzuki SV650. Photo courtesy of Scott Shumaker.