Vectors - Paint Shop Pro 7

©Doodles by LadyFox 03/22/07

This tutorial and all images [except the PSP logos] belong to ©Doodles by LadyFox. You may make a copy of this tutorial or print it out for your own personal use ONLY. You are free to LINK to my tutorials if you would like to share them. What you create from my tutorials belongs to you to do with as you wish.

Feel free to email me LadyFox

This tutorial was done with PSP7
This is part of a series of tutorials to help the users of PSP 6 & 7 ease into vectors in the newer versions of Paint Shop Pro. Each tutorial will create the same image using a different version of PSP.

YOU WILL NEED

	Paint Shop Pro - Download a trial version
	Need an older version of PSP you can download trial versions
	Basic knowledge of vectors and layers

Remember to SaveOften
STEPS - These are the steps I used.

Lets Begin

New Image 200x400
File/Save As: tulip.psp
The colors I am using are:
Yellow Foreground: #FEB424
Yellow Background: #FDD76F

Green Foreground: #1A3C0A
Green Background: #315A28

The Flower

New Vector Layer: tulip
Colors: Yellows

Preset Shape Tool

Shape type: Ellipse
Retain style: NOT Checked
Antialias: Checked
Create as vector: Checked
Line Width: 1
Line style: +1 Solid

Place the cursor at 46,11

the bottom left of the screen
Click and hold the Left Mouse button while moving the cursor downward and to the right until you get to 141, 130

Release the mouse button

Object Selection Tool

Right Click/ Node Edit

Notice: when you choose Node Edit the fill is automatically turned off

Add 2 nodes

Click on the Left side node Hold down the Shift Key

Click on the Right side node
Release the Shift Key
Click and hold on one of the highlighted nodes
Move the node/nodes up until they are about even with the center node

Click the left node
Hold Down the Ctrl Key and tap the Left Arrow key on the keypad 10 times

Click the right node
Hold Down the Ctrl Key and tap the Right Arrow key on the keypad 10 times

Click on the left node we added
Right Click/ Node Type/ Cusp

Repeat for the right node we added
Hold down the shift key and click on the Left node we added

Release the Shift Key
Hold down the Ctrl Key
Tap the down arrow on the keypad 25 times

Use the control Arms to adjust the shape of the flower

Details

Background Style: No Fill

New Vector Layer: details

Draw Tool

Type: Point to Point Line
Width: 1
Line style: #1 Solid
Antialias: Checked
Create as Vector: Checked
Close path: NOT Checked

Place the cursor near the left node we added
Click once
Move to just left of the bottom node
Click once

Object Selection Tool

Right Click/ Node Edit

Right Click on the top node/ Node Type/ Curve After
Pull the arm to the right a little

Right Click on the bottom node/ Node Type/ Curve Before
Pull the arm to the right a little

Repeat for the right side

Stem

New Vector Layer: stem

Colors: Greens
Background Style: No Fill

Draw Tool

Type: Point to Point Line
Width: 8
Line Style: +1 Solid
Antialias: Checked
Create as Vector: Checked
Close Path: NOT Checked

Place the cursor at the bottom of the flower
Click once
Move to the bottom of the image
Click once

Following the same steps as for the details, shape the stem

Leaves

New Vector Layer: leaves

Preset Shape Tool

Shape type: Ellipse
Retain style: NOT Checked
Line Width: 1
Antialias: Checked
Create as vector: checked

Draw a long thin ellipse

Vector Object Selection Tool

Right Click/ Node Edit

Run the mouse over the center bar until you see the rotation arrows.
Click the mouse and rotate the bottom of the leaf toward the stem

Object Selection Tool

Right Click/ Node Edit

Use the nodes and adjust the curves of the leaves.

Layers/ Duplicate

Active layer: copy of leaves

Click on any blank space
Image/ Mirror

Click on the leaf to select
Move it into place

Adjust the shape if desired.

Now create the image using one of the other versions of Paint Shop Pro
PSP6, PSP8, PSP9, PSPX