|
|
New!Scotty's Spectrum Analyzer
foundation kit
Basic Kit for Modularized Scotty's Spectrum
Analyzer
- Revised!one
MSTR_OSC Rev. 2
- Revised!one
DDS Rev. 2
- Revised!one
DDS_SQR Rev. 1
- Revised!two
MIXER Rev. 2
- New!two
FREQ_SYNTH Rev. 0
- New!one
ASC_Rev. 0 ( Analog USB 2.0 Controller)
See here
for more info.
See here
Engineering Change Order.
The foundation kit includes 8 printed circuit
boards, all passive components, all semiconductor components and hybrid
modules necessary to populate the printed circuits. This set of boards
and kits will provide the First Local Ocillator and Mixer, the Second
Local Ocillator and Mixer, the Master Oscillator, the DDS and the DDS
Squaring circuits. One syringe of solder paste is provided, enough to
complete the entire kit. This kit does not include any interconnecting
cables, mechanical or other hardware, but they are available, elsewhere.
This kit is different from the precious SSA_SET in
three major ways: 1) the VCO and PLL functions have
been combined into one board, saving four (4) RF connectors in each of
the local oscillator functions, that reduces the number of RF
connectors in the system by eight (8). The connections between the
Master Oscillator, the DDS, and the DDS Squaring boards have been laid
out so that the another four (4) RF connectors are not necessary. The
redesign saves a minimun of twelve (12) RF connectors. 2)
The serial version of control board is now included in this
foundation kit, previously, no control function was offered. 3)
The IF signal amplication and detection circuits are not included in
this kit because multiple variations are being offered for these
circuits, and therefore, they are offered separately.
These boards and
kits are now available for shipping.
|
