Universal Risers, 7/8" bar style handlebar risers - 1" UP.

Part# X103 (aluminum finish) = $75.95 + shipping

Part# X104 (black anodized finish) = $75.95 + shipping

Motocross - CR, KX, RM, YZ, etc.

Eduro / Dual Sport - XR, DR, etc.

Street
Aprilia, Caponord
BMW, R1150R
Honda
ST1100  - This riser replaces H114 & H115. It is easier to install and less expensive.
Nighthawk - Use X104 for matching the stock black coloring.
Ducati Models 2001 and earlier
Kawasaki, ZRX1100, ZRX1200, Vulcan - older 750, ZR-7 (will require a longer brake hose, not included)
Moto Guzzi, Breva, 2005 and earlier.
Moto Guzzi, most models with 7/8 inch bars
Suzuki, Burgman, SV1000, V-Strom (all)
Triumph, Thunderbird
Yamaha, FZ-1, FZ-6
Fits common bolt pattern.

The X103/X104 risers will fit nearly any motorcycle with a standard bolt pattern using 7/8" (20mm) diameter tube style handlebars. Please use reasonable caution when testing them on new models.
The risers are placed between the fork crown and the handlebars to raise the bars up 1" (25mm). This will help to relieve wrist and neck pain on long rides. Most models require no change of any control cables, wiring, or hoses. X104 risers are identical in specs, with a black anodized finish.
Instructions for installing handlebar risers for tube handlebars.

X104 risers mounted on a Yamaha FZ-1. Photo courtesy of Rich Merrill.

X-103 risers mounted on a Suzuki SV650. Photo courtesy of Steve Lynch.

X104 installed on a Honda XR250R. Photo courtesy of Harold Williams.