Remove the stock (OE - original equipment) air box by loosening
clamps and unclipping airbox, then raise it out of the engine
space. Remove bolt. Place small end of new air duct into inlet
of black flex intake tube, clamp. Place the cone filter onto
the large end of the air duct, clamp. Place OE bolt into bracket
and snug down into original bolt location. Using an equal tightening
sequence, when all areas are satisfactory, snug all fasteners/clamps
down tight.
Done!
Take your PT for a cruise. Enjoy the new sound, the additional
power and better fuel economy.
|
|
New air intake - installed
|
|
